iBasso AMP8 4.4mm Balanced Amplifier Card iBasso AMP8 is a fully discrete balanced amp with a 4.4mm output port especially designed for iBasso DX200 and iBasso DX150 music players. Featuring both a high voltage and current output high current output is very useful for low impedance multi drivers in-ear monitors. When using OPAMPs to develop an amplifier it is almost impossible to achieve high voltage output and high current output especially on portable devices. Some engineers have used the TPA6120 on the buffer stage to achieve 750mA output current. However it has 10ohm output impedance which isnt ideal for low impedance IEMs or headphones. So iBasso decided to use discrete components which are usually used on desktop amplifiers to develop the iBasso AMP8 but the development process is much more difficult when using discrete components. After a long development period and with their final design iBasso presents the AMP8 card that has both high voltage and high current output and at the same time maintains low output impedance with extremely good measurements. AMP8 complements the premium performance of the DX150 and the DX200 giving you even more choices when playing the music you enjoy. Low VCE transistors are utilized and are manually sorted and paired providing better consistency and linearity. The low VCE also expands the linearity range. The transistors used on the buffer stage have a 2700mAh output current rating which allows the AMP8 to drive IEMs and headphones that require high current with ease. A Pentaconn 4.4mm balanced output port is used. The large double contact area of this socket contact lowers resistance and allows better current transmission. Average Play Time: 7 hours. Play time varies with different sample/bit rates volume and headphone/IEM loads. Features Especially designed for iBasso DX200 and iBasso DX150 music players. +/-8V high voltage ...
iBasso CA01 2.5mm Balanced to 3.5mm Single Ended Cable Adaptor The CA01 is a handmade 4-wire braided cable adapter with a 2.5mm female end and a 3.5mm male end. The wire is made of a high purity oxygen free copper and is insulated with proprietary high quality dielectric with antioxidants. Features Socket: 2.5mm gold-plated balanced socket Plug: 3.5mm gold-plated single ended plug Length: 10cm +-0.5cm
iBasso AMP5 High Voltage and Current Amplifier Module The AMP5 designed for use with the iBasso DX200 offers the 3.5mm single ended user a high current amp for demanding headphones. It is also very quiet and works well with IEMs. With an extremely low background noise music is all the more layered and transparent. The AMP5 handles the dynamics of the music and delivers excellent headroom giving the quality of sound that so many hope for. The card features a +/- 8V voltage swing which significantly improves the dynamics and headroom of the music being listened to. The optimized buffer architecture results in a lower current consumption and higher play time while still being able to output a high current resulting ina clean and very fast transient response. The AMP5 has a 3.5mm phone out and a 3.5mm line out. The average play time of your DX200 with the AMP3 card attached is 9 - 10 hours. Play time varies with different sample/bit rates and headphone/IEM loads. Features Two high voltage 3.5mm outputs; one phone out one line out. 9 - 10 hour average play time Suitable for the iBasso DX200 DAP
Please search the site. Your product may have moved.